Charlie Morecraft Toolbox Safety Series: Housekeeping

If your workers are hesitant to clean up, put away tools, remove trip or slip hazards or keep evacuation routes clear, they need to hear Charlie’s resounding message. This program shows not only how good housekeeping is performed, but why it is essential.

Charlie Morecraft Toolbox Safety Series: Hearing Conservation

When a worker loses hearing due to noise in the workplace, it is gone forever. That’s why it’s essential to take the right steps to prevent hearing loss. Charlie shows workers how to protect their hearing by reducing or muffling workplace noise, and selecting and using the proper protective equipment, such as ear plugs and ear muffs.

Charlie Morecraft Toolbox Safety Series: Fire Prevention

Charlie Morecraft was burned alive in a fire at a refinery and that one accident continues to affect his life every day. That’s why there’s no one better to teach your workers. Charlie introduces workers to the building blocks of fire by using the “fire tetrahedron,” and describes preventive measures ranging from good housekeeping to electrical safety.

Charlie Morecraft Toolbox Safety Series: Driving Safety

This program reminds workers of the dangers they face on the road, then shows them how to prevent accidents and keep themselves injury-free through vehicle inspection, knowledge of road rules, and safe driving techniques.

Charlie Morecraft Toolbox Safety Series: Back Safety

This program will show your crew the techniques Charlie uses to save wear and tear on his back, while helping them to understand why these methods will work for them as well. This training describes how the back functions and why it is important to avoid bad postures, using faulty methods when lifting, or even being hunched over the computer for long periods of time. This video also demonstrates “back friendly” methods for lifting, bending, or reaching for an item on an elevated shelf.

Charlie Morecraft Toolbox Safety Series: Hand Safety

This program shows workers how to prevent hand injuries and protect themselves through safe procedures for machine operations, using the eyes to recognize potential hazards before the hands are put at risk, and selecting the right work gloves for the job.

Charlie Morecraft Toolbox Safety Series: Electrical Safety

This program focuses on methods for safe work and injury prevention that include careful inspection of electrical components, removal of broken equipment from service including frayed cords, being sure to ground equipment using Ground Fault Circuit Interrupters, avoiding power lines and stormy weather, and using PPE.

Charlie Morecraft Toolbox Safety Series: Confined Spaces

This program alerts workers to the hazards that may be waiting within a confined space, then demonstrates safety procedures including confined space permitting and use of monitors or “sniffers” for reading oxygen levels or detecting toxic gases.

Charlie Morecraft Toolbox Safety Series: Respiratory Protection

This program shows workers how to protect their lives and health through respiratory protection. After reviewing respiratory hazards, the video demonstrates how proper ventilation and PPE ranging from simple dust masks, to air purifying or air supplying respirators can provide the protection workers need.

Charlie Morecraft Toolbox Safety Series: Working at Heights

This program focuses on the safe use of step and straight ladders, and safe methods for going up and down that dreaded access route to higher levels: the stairs!

Charlie Morecraft Toolbox Safety Series: Safe Forklift Operations

This program explains how to operate forklifts safely, and what all personnel can do to keep themselves safe when a forklift is in use. From the physics of forklift operations, to procedures for inspecting equipment, squaring up, loading, transporting and unloading this video covers it all. Length: 23 minutes

Charlie Morecraft Toolbox Safety Series: Hazard Communication (HAZCOM)

This program shows workers how to use information found on warning labels and in Safety Data Sheets (SDS) to safely handle and store chemicals using PPE, and how to properly respond to any leaks, spills or other accidents that may occur.

Charlie Morecraft Toolbox Safety Series: Slips, Trips, and Falls

Slips, trips and falls are the most common cause of workplace injury – and among the most preventable. Let Charlie show your crew how to prevent injuries: by removing trip and slip hazards, keeping walking surfaces in top condition, wearing the proper footwear, walking using the right technique, and never rushing.

Charlie Morecraft Toolbox Safety Series: Personal Protective Equipment (PPE)

This program provides awareness-level training on all types of PPE including specialized equipment, such as respiratory protection, personal flotation devices, and protective equipment for hot work and welding.

Charlie Morecraft Toolbox Safety Series: Lockout/Tagout – Energy Control

In this program, Charlie shows your crew how to prevent accidents through Lockout/Tagout procedures. The video focuses on the basics of LO/TO, as well as on some of the complications workers are likely to encounter, such as when and how to use multiple locks, why and how to use tags without locks in certain cases, and how to maintain LO/TO during a shift change.

Charlie Morecraft Toolbox Safety Series: Job Safety Analysis (JSA)

This program guides workers through this three-step process while giving them new ways to think about each step. Charlie explains why you need to work as a team to identify hazards and plan for the safety of everyone on the job.

Charlie Morecraft Toolbox Safety Series: First Aid and Bloodborne Pathogens

In this program, Charlie builds awareness of how to recognize and respond to common workplace injuries and medical conditions. The program demonstrates First Aid for cuts, burns, fractures and many other injuries, and shows how to recognize life-threatening conditions such as heart attack and stroke. Length: 17 minutes.

For a complete list of toolbox safety videos visit https://www.charliemorecraft.com/product-category/safety-toolbox/ or email us at info@charliemorecraft.com

The post Safety Training Toolbox Videos with Charlie Morecraft – Keynote Safety Speaker first appeared on Charlie Morecraft - Keynote Safety Speaker, Safety Videos, Bureau of Speakers.

The post Safety Training Toolbox Videos with Charlie Morecraft – Keynote Safety Speaker appeared first on Charlie Morecraft - Keynote Safety Speaker, Safety Videos, Bureau of Speakers.